Making Detailed Settings - Siemens SINAMICS S120 Commissioning Manual

4.4.7.3

Making detailed settings

You can configure the following motor details for motors during commissioning:
● Basic parameter assignment
● Rating plate values
● Motor brake
Procedure
1. Select the motor in the device view and open the Inspector window.
2. In the Inspector window, select the "Motor details > Rating plate values" menu.
In the screen form, the following setting options are displayed:
Figure 4-29
3. To perform the basic parameter assignment for the motor, click the
"Basic parameter assignment" entry.
The function view of the drive axis is opened:
Make the required settings here (see chapter "Basic parameter assignment (Page 155)").
4. In the Inspector window, select the menu "Motor details > Rating plate values" again.
5. Make the settings in the white fields.
The gray fields are refreshed automatically in accordance with your settings.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Motor details rating plate values
4.4 Creating a project offline in Startdrive
icon next to the
Commissioning
115