Siemens SINAMICS S120 Commissioning Manual page 134

Commissioning
4.5 Establishing an online connection to the drive
Going online
1. Select the drive unit with which you want to go online in the project navigation (or in the
device view).
2. Click the
The "Go online" dialog opens.
Figure 4-40
3. If a correctly configured interface has still not been set, then select "Type of the PG/PC
interface" in the drop-down list.
4. If no interface has yet been preset, select the "PG/PC interface" for your PC in the drop-
down list.
5. Select the required "Connection to interface/subnet" from the drop-down list.
For Ethernet/IE, this is X127 of the CU320-2 PN.
6. Select one of the following search options in the "Select target device" drop-down list:
– Show devices with the same addresses
– Show all compatible nodes
– Displaying accessible nodes
132
button.
Go online
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0