Siemens SINAMICS S120 Commissioning Manual page 141

Adding an IP address in the subnet
1. Click in the toolbar on button
The "Go online" dialog opens.
2. Select the device and click "Connect" to confirm.
3. Assign an IP address to the PG/PC within the subnet of the drive unit.
If you have not already done so, it is now possible to temporarily assign a suitable IP
address from the subnet of the device via Windows Control Panel.
Figure 4-47
4. Click "Yes" to assign the IP address.
Figure 4-48
5. Confirm with "Yes". The interface has been assigned the IP address within the
PROFINET subnet.
Result
● You have assigned the PG/PC interface.
● The TIA Portal has assigned an IP address within a project.
● The online connection has been established.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Assigning an IP address
IP address added
4.5 Establishing an online connection to the drive
.
Commissioning
139