Viewing Component States; Component States - Avaya CallPilot 202i Manual

Component
Motherboard
Media Bus
Time Switch
DSPs
Multimedia channels
Call channels
DS30X link

Viewing component states

View the state of a component to determine the general condition of the component, including
whether the component is disabled or off duty. The state of a component appears in the
Maintenance section of the Maintenance page.

Component states

You can determine the state of a component by looking at the State box in the Maintenance
section.
State
Active
Disabled
Idle
InTest
Loading
No resources
Not Configured
Avaya CallPilot 202i Server Maintenance and Diagnostics
Start, stop? Courtesy
stop?
Yes No
Yes No
No No
Yes No
Yes Yes
Yes Yes
Yes No
The component is working and currently involved in processing a
call.
The diagnostic failed.
The component is working but not currently involved in processing
a call.
A diagnostic is running on the resource or device.
The component started, which takes it out of the Off Duty state.
This state occurs quickly and is immediately followed by Idle.
The hardware required for the component to operate is not installed
or is not operating properly.
The device is not configured in CallPilot.
Diagnostic Replaceable?
s
available?
Yes Yes (IPE server)
Yes No
No No
Yes No
Yes No
No No
No No
Description
Viewing component states
December 2010 53