Table of Contents
Advertisement
1-2
1. Installing the Machine
Installation Site
To ensure utmost safety and prevent possible malfunctions of the machine, install it in a location which
meets the following requirements.
A place away from a curtain or the like that may catch fire and burn easily.
An area where there is no possibility of being splashed with water or other types of liquid.
An area free from direct sunlight.
A place out of the direct air stream of an air conditioner, heater, or ventilator.
A well-ventilated place.
A dry place.
A dust-free location.
An area not subject to undue vibration.
A stable and level location.
A place where ammonia or other organic gas is not generated.
A place which does not put the operator in the direct stream of exhaust from the machine.
A place which is not near any kind of heating device.
Power Source
The power source voltage requirements are as follows:
Use a power source with little voltage fluctuation.
Voltage Fluctuation
Frequency Fluctuation : Within ± 0.3%
Space Requirements
To ensure easy machine operation, supply replacements, and service maintenance, adhere to the
recommended space requirements detailed below.
112-1/2
9-1/2
82-3/4
40-1/2
<With EDH-3, PF-115, FN-5 and C-306L mounted>
: Within ± 10%
20-1/4
16
26-1/4
48-1/4
18-1/2
29-3/4
4002O338AA
Unit: Inch
Advertisement
Table of Contents
