Nortel 1120E Administration Manual page 95

Table 37
PVQMon IP configuration
PVQMon IP :
20
Table 38
NAT Signal configuration
NAT Traversal
NAT Signal :
Table 39
NAT media configuration
NAT Media : STUN
None
STUN
Copyright © 2008, Nortel Networks
.
If this server is available on the network, enter the PVQMon IP
address.
0. 0. 0. 0
Configure the NAT Traversal Method. Use one of the following
methods to traverse Network Address Translation (NAT) devices for
the IP Phone 1140E with SIP Firmware.
The next five tables show menu items in the Device Settings menu
that apply to configuring the NAT Traversal Method.
• NAT Signal
Select either None, SIP_PING, or STUN to define the NAT
traversal mode for SIP signaling.
STUN
None
SIP Ping
STUN
• NAT Media
Select either None or STUN to define NAT traversal mode for
signaling.
• NAT TTL:
Enter the Time to Live (TTL) in seconds for the NAT traversal.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008
Configure the device settings 95