Vmail_Delay; Autologin_Enable; Auto_Update; Auto_Update_Time - Nortel 1120E Administration Manual

36 Configure the provisioning server
Feature configuration commands
•
•
•
•
•
Copyright © 2008, Nortel Networks
.
If the IP Phone 1120E is behind a firewall, it is very likely that you must
keep SIP_PING enabled, unless an alternate method of keeping the
firewall pinhole open is used.
The default value is yes if not specified in the device configuration file.
If SIP_PING is changed in the Device configuration file, the IP Phone
1120E must be rebooted for the change to take effect.
— YES - enables pinging
— NO - disables pinging
VMAIL [vmail_number] is the voice mail address which can be the
URI or the DN number of the voice mail server. This command takes
a string as a parameter. This is the default link for a new user profile
only. Individual users can customize the link through Prefs->Message
Options->Voice Mail Settings. This command has no effect on the user
profiles after it is created.
— vmail_number - the number or URI of the voicemail server.
VMAIL_DELAY [x] is a delay, set in milliseconds, between when the
voice mail server answers the call and the start of dialing the voice mail
user ID. The default value is 1000ms.
— x - the delay in milliseconds
AUTOLOGIN_ENABLE [YES | NO] allows the IP Phone to automatically
login after the IP Phone has been restarted, either by the software or by
external sources, such as a power failure. A user can be logged out due
to the proxy server going down or during a firmware upgrade.
— YES - turns on the auto login feature.
— NO - turns off the auto login feature.
AUTO_UPDATE [YES | NO] is a command to enable or disable
the automatic updating of the IP Phone 1120E with SIP Firmware
configuration files from the provisioning server. Enabling this command
causes the IP Phone 1120E with SIP Firmware to check for updates
once every day. The default is disabled.
— YES - turns on the AUTO_UPDATE feature.
— NO - turns off the AUTO_UPDATE feature.
AUTO_UPDATE_TIME [x] is the actual time in seconds, starting from
midnight, before an automatic update occurs. Each IP Phone 1120E
adds random numbers to the time specified by this command so every
IP Phone 1120E does not try to access the provisioning server at the
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008