Downloadable Wav Files; Sip Firmware Release 1.1 For Ip Phone 1120E Administration - Nortel 1120E Administration Manual

Sip firmware release 1.1
Hide thumbs Also See for 1120E:
Table of Contents

Advertisement

56 Configure the provisioning server
Downloadable WAV files
It is possible to customize the ring tones on the IP Phone 1120E with
SIP Firmware. Up to five special ring tones can be downloaded from the
provisioning server and stored on the IP Phone 1120E. The end user can
select which ring tone they would like to implement.
In order to download these special files, the files must reside on the
provisioning server and be specified in the SIP provisioning file. (See
"Download the SIP Firmware to the provisioning server" (page
WAV files have a maximum size of 128 Kbytes each for the IP Phone 1120E.
The file format is restricted to ITU-T A-law or u-law (8.0 kHz, 8-bit, mono
or 16.0 kHz, 16 bit mono ).
After the WAV files are downloaded to the IP Phone 1120E, the WAV file
names appear in Pref->Audio->Tones->Ring Pattern (1 to 8 are standard
ring tones, and 9 and above are WAV ring tones) and the WAV ring tones
can then be selected to replace the standard ring tones.
For further information about downloadable WAV files, see the SIP Firmware
Release 1.1 for IP Phone 1120E User Guide (NN43112-104).
Copyright © 2008, Nortel Networks
.

SIP Firmware Release 1.1 for IP Phone 1120E Administration

NN43112-300 02.03 Standard
27 May 2008
26).) The

Advertisement

Table of Contents
loading

Table of Contents