Nortel 1120E Administration Manual page 71

Table 11
Using the Navigation key cluster to navigate in the Local Tools menu
Key
Down
Up
Right
Left
Select key (center of cluster)
2
3
4
5
If the version number is equal to or higher than 0625C1H, go to the section
"Convert UNIStim Firmware to SIP Firmware on the IP Phone 1120E"
(page
Copyright © 2008, Nortel Networks
.
To close this menu, use the Quit key.
Select 2. Local Diagnostics in the Local Tools menu by pressing
the Select key in the Navigation key cluster or by pressing the
number 2.
Select IP Set and DHCP Information by pressing the Select key in
the Navigation key cluster or by pressing the number 2.
Use the down arrow in the Navigation key cluster to scroll down
the menu to Firmware Version.
Note the UNIStim Firmware version number and write it down.
Compare the version number to the minimum-required UNIStim
Firmware version (0625C1H).
UNIStim Firmware version names contain numbers and letters.
Use the last three characters in a version to compare the version
of UNIStim on an IP Phone 1120E (0625C1H) with the minimum
required version for the upgrade. Note that C23 is greater than C1H
and C1B is less than C1H.
75).
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
Upgrade to the Minimum UNIStim Firmware 71
Action
Moves highlight down
Moves highlight up
Selected current menu item
Closes menu
Selects current menu item
—End—
27 May 2008