Nortel 1120E Administration Manual page 70

70 Upgrade and convert the IP Phone 1120E firmware
Procedure 8
Checking the UNIStim Firmware version on an IP Phone 1120E already in use
Step
1
Copyright © 2008, Nortel Networks
.
If the version number is equal to or higher than 0625C1H, go to
the section "Convert UNIStim Firmware to SIP Firmware on the IP
Phone 1120E" (page
If the number is lower than 0625C1H, go to the section
UNIStim Firmware to the minimum required UNIStim Firmware"
(page 72) and follow the instructions to upgrade an IP Phone 1120E
to the minimum-required version of UNIStim Firmware before a
conversion to SIP Firmware.
Action
Press the Globe/Services key on the IP Phone 1120E twice quickly.
If the admin password prompt appears, enter the password
26567*738.
The Local Tools menu appears:
Table 10
Local Tools menu
1. Preferences
2. Local Diagnostics
3. Network Configuration
4. Lock Menu
To make a selection, press the number associated with the menu
item, or use the Navigation key cluster.
to scroll through the menu items. Press the Select key to select
the highlighted menu item.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
75).
—End—
27 May 2008
"Upgrade