Nortel 1120E Administration Manual page 28

28 Configure the provisioning server
Provisioning is performed using the commands in the 1120eSIP.cfg
configuration file. The configuration file can have multiple sections.
Each section in the configuration file defines rules for different file types. A
section starts with a [SECTION NAME] to specify rules for each file type.
For example: [FW].
A section is a mandatory field. Parsing of download rules for each file
type starts with finding this key word. Currently, the following sections are
supported by the IP Phone 1120E with SIP Firmware:
•
•
•
•
•
Firmware [FW] image files originate from Nortel only and are authenticated
during firmware download. If the FW authentication fails, the IP Phone
1120E displays an error message and continues operation with the existing
FW image.
Device configuration files are used to set various parameters in the IP
Phone 1120E.
Dialing plan files are used for configuring dialing patterns and the format of
originated URIs in the SIP message.
Language files are simple text files containing all text prompts used by the
IP Phone 1120E. Language files are used for the localization of the IP
Phone 1120E without firmware upgrade. Each language file has a header
that contains a firmware load version with which this file is associated.
Language files are signed by Nortel and are authenticated by the firmware
for security reasons.
Tones files are standard in the Telecommunications Standardization sector
of the International Telecommunications Union (ITU-T). The set supports
custom tone files. The tone files must be WAV files with the following
Copyright © 2008, Nortel Networks
.
Note: The maximum length of a line item in the configuration file is 80
characters. If a line item with more than 80 characters is encountered
when parsing the configuration file, the remaining portion of the file
following that line item will be ignored.
'#' is used to indicate a comment. Anything preceeding a '#' is a
comment.
[FW] section for the firmware load download
[DEVICE_CONFIG] section for the device configuration
[DIALING_PLAN] section for the dialing plan files
[LANGUAGE] section for the language prompts files
[TONES] section for the downloadable tone files
Note: Some call servers do not yet support SIP URI dialing.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008