Fastbusy_Tone; Congestion_Tone - Nortel 1120E Administration Manual

46 Configure the provisioning server
•
•
NAT configuration commands
•
Copyright © 2008, Nortel Networks
.
— on_time - the duration of the tone when it is on. A -1 indicates
a continuous tone.
— off_time - the duration when no tone is played.
FASTBUSY_TONE [frequency1 | frequency2 | on_time | off_time] is
used to select the tone advising the caller that the telephone number
is busy. It is fast in cadence or frequency. You can select the country
specific tone. The default tone is the North American tone.
— frequency1 - the frequency of tone 1.
— frequency2 - the frequency of tone 2.
— on_time - the duration of the tone when it is on. A -1 indicates
a continuous tone.
— off_time - the duration when no tone is played.
CONGESTION_TONE [frequency1 | frequency2 | on_time | off_time]
is used to select the tone advising the caller that the groups of lines or
switching equipment necessary for setting up the required call, or for the
use of a specific service, are temporarily engaged. You can select the
country specific tone. The default tone is the North American tone.
— frequency1 - the frequency of tone 1.
— frequency2 - the frequency of tone 2.
— on_time - the duration of the tone when it is on. A -1 indicates
a continuous tone.
— off_time - the duration when no tone is played.
The IP Phone 1120E supports using WAV files to replace the ringtone
Frequency/Cadence pattern. For a system-wide setting, the country
default values can be used.
NAT_SIGNALING [NONE | SIP_PING | STUN] indicates the type of
protocol used for NAT traversal in the signaling port. The IP Phone
1120E with SIP Firmware supports two methods of NAT traversal of the
signaling path: SIP_PING and STUN.
— NONE - If the value is not set to None, this parameter overrides the
value of the parameter SIP_PING in the device configuration file.
— SIP_PING - a Nortel proprietary NAT traversal protocol. Note that
SIP_PING only supports NAT traversal in the signaling port.
— STUN - the most common NAT traversal method.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008