Nortel 1120E Administration Manual page 90

90 Device Settings on the IP Phone 1120E with SIP Firmware
3
4
5
Table 22
Using the Navigation key cluster to navigate in the Device Settings menu
Key
Down
Up
Right
Left
Select key (center of cluster)
6
Table 23
EAP configuration
Enable 802.1x (EAP):
Device ID:
Password:
7
Copyright © 2008, Nortel Networks
.
Menu items can also be accessed through the IP Phone 1140E
keypad. Press the number (1-4) corresponding to a menu item
to highlight that menu item. Press the Select key to select the
highlighted menu item.
To close this menu, use the Quit key.
In the Network, choose 2. Device Settings.
Enter the admin password. Press the OK Context-sensitive soft key.
Use the Navigation key cluster to edit an item:
In Edit mode, the first field of the item is highlighted. Press the
Apply&Reset Context-sensitive soft key to save settings in the
Device Settings menu after all the necessary changes are made.
This action resets the IP Phone 1140E.
Press the Return Context-sensitive soft key to exit the Device
Settings menu without saving any changes.
Navigate to the first item in the Device Settings menu to configure
EAP.
A check mark appears in the check box if the item is active.
If the Enable 802.1x (EAP) check box is checked, fill in the Device
ID and the Password.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
Action
Opens list or moves highlight down list.
Moves highlight up list.
Selects the next item or moves the cursor right in
an edit item.
Selects the previous item or deletes a character
in the edit field.
Selects the highlighted item in the combo box or
ends edit mode.
27 May 2008