Nortel 1120E Administration Manual page 30

30 Configure the provisioning server
•
Optional keywords in the Provisioning file are:
•
•
•
•
•
•
The downloading of these files is initiated when an IP Phone 1120E is
powered on, when an automatic check for updates is invoked, or when a
"Services ->System -> Check For Updates" is performed. Any of these
Copyright © 2008, Nortel Networks
.
FILENAME [filename] specifies the file name to be downloaded for
this section. For the language and tone section, the use of multiple
filenames is allowed.
PROMPT [YES | NO] is used to indicate if the IP Phone 1120E should
prompt the user for an update before the operation is performed. This
command is optional with the default set to NO.
— YES - enables the prompt
— NO - disables the prompt
PROTOCOL [TFTP | FTP | HTTP] defines the protocol used to download
the file. The IP Phone 1120E with SIP Firmware supports TFTP, FTP
and HTTP protocols for file download. This command is optional. If it is
not present, the default protocol TFTP is used.
If using FTP or HTTP, SRV_USER_NAME and SRV_USER_PASS are
also key words. These commands specify the credential used to login
to the file server for file download. If not present, the protocol default
credential is used (no credential for TFTP and HTTP and anonymous
with no password for FTP).
SERVER_IP [address] allows the IP Phone 1120E to connect to the
specified IP address or name of the server for which the file can be
downloaded. If the address is not specified, the SERVER_IP that is used
is the same SERVER_IP that is used to download the provisioning file.
DELETE_FILES [YES | NO], if present, erases the language and tone
files stored in the IP Phone 1120E before new files are downloaded.
Otherwise, new files with different names are added without erasing
existing files. This command is optional. Note that there is a hard limit
of 5 language files and 5 tone files that can be stored in the IP Phone
1120E. When the limits are exceeded, no new file can be accepted
for download.
— YES - erases the existing language and tone files
— NO - does not erase existing language and tone files
SRV_USER_NAME [username] - If the protocol is FTP or HTTP, this
keyword specifies the user name to log on to the server.
SRV_USER_PASS [password] - If the protocol is FTP or HTTP, this
keyword specifies the password to log on to the server.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008