Xerox WorkCentre 7132 Service Documentation page 1139

Figure 5 Removing the Right Cover
2. Remove the knob screws. (Figure 6)
1. Remove the knob screws (2)
Repairs/Adjustments
REP 16.12.2
Figure 6 Removing the knob screws (2)
2. Remove the Tray Guide. (Figure 7)
1. Remove the screws (4).
2. Remove the plastic rivet to remove the wire harness clamp.
3. Remove the wire harness from the Tray Guide opening.
4. Remove the Tray Guide.
January 2007
4-188
Reversion 4.0
WorkCentre 7132