Xerox WorkCentre 7132 Service Documentation page 1507

Chain-Link Name
077-020 TM Takeaway Clutch
077-021 TM Takeaway Motor (High)
077-022 TM Takeaway Motor (Low)
091-001 BCR DC BIAS
091-002 BCR AC BIAS
091-003 BCR DC/AC BIAS
091-004 Drum Motor (Normal Speed)
091-005 DRUM MOTOR(Half Speed)
091-006 Erase Lamp
092-001 ADC Specular
092-002 ADC Diffuse
092-003 ADC Shutter Open
092-004 ADC Shutter Close
092-005 Toner Dispense
093-001 Deve Bias-DC
093-002 Deve Bias-AC
General procedures information
Component Control
Table 2 Output Component Control Codes IOT
Connector
Level Meaning
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- Same as Name
- ADC specular reflection LED is
turned on/off.
- ADC regular reflection LED is turned
on/off.
- ADC Shutter is opened.
[I/O]TMA Shutter Open
After executing this Component Con-
trol, MOB ADC Shutter needs to be
closed. Otherwise, the sensor inside
the shutter may be contaminated
(MOB ADC shutter will be automati-
cally closed when printing)
- ADC Shutter is closed.
- Toner Dispense Clutch is turned on
(turned off in 2 seconds)
L Same as Name
L Same as Name
January 2007
6-184
Timer Off Cycle Operation Remarks
O X
O X
O X
X X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
O X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
X X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
X X
X X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
X X
X Not Available
O
X Not Available
O
X Not Available
O
X Not Available
O
X Not Available
O
O X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
O X The BCR AC, BCR DC, DEVE DC and BTR
output simultaneously. * CF=53-45(CL=751-
560) to 1 (single output) enables indepen-
dent outputs.
Reversion 4.0
WorkCentre 7132