Xerox WorkCentre 7132 Service Documentation page 1505

Chain-Link Name
047-005 OFFSET MOTOR1 REVERSE ROTA-
TION
047-022 EXIT DRIVE MOTOR FORWARD (Eject
Paper out)
047-023 EXIT DRIVE MOTOR REVERSE (send
paper into Dup)
047-024 Exit Gate Solenoid
047-025 FACE UP GATE SOLENOID
047-026 EXIT 2 FAN
061-001 ROS Motor ON
061-002 ROS Fan ON
071-001 Tray 1 Feed/Lift Up Motor (CW2)
071-002 Tray 1 Feed/Lift Up Motor (CCW2)
071-003 Tray 1 Feed/Lift Up Motor (CW12)
071-004 Tray 1 Feed/Lift Up Motor (CCW12)
072-001 Tray 2 Feed/Lift Up Motor (CW)
072-002 Tray 2 Feed/Lift Up Motor (CCW)
General procedures information
Component Control
Table 2 Output Component Control Codes IOT
Connector
Level Meaning
- Same as Name
- Same as Name
- Same as Name
H Switch Gate to Exit2/FUT
L Switch FUT Gate to Face Up Tray
- Exit 2 FAN rotating
- Send a pulse to
PLYGON_MOT_CLK (this pulse is
generated when ROS main task is
initiated).
- ROS Fan is activated
- Turn Lift Up Motor on for two sec-
onds when Tray 1 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 1 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 1 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 1 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 1 Level Sensor is
''L'' (lifted down). Lifter Motor will not
rotate when Tray 1 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 1 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 1 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 2 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 2 Level Sensor is
''H''(lifted up).
- Turn Lift Up Motor on for two sec-
onds when Tray 2 Level Sensor is
''L''(lifted down). Lifter Motor will not
rotate when Tray 2 Level Sensor is
''H''(lifted up).
January 2007
6-182
Timer Off Cycle Operation Remarks
X X EXIT
X X Not Available
X X Not Available
X X Not Available
X X EXIT
X X Not Available
X X
X X
O X
O X
O X
O X
O X
O X
Reversion 4.0
WorkCentre 7132