Xerox WorkCentre 7132 Service Documentation page 1472

Chain-Link NVM Name
820-127 Blank Data Estimation Correction Coeffi-
cient
820-128 Blank Detection Threshold Correction
Coefficient
820-129 Resend Unsent Documents
820-130 Delete Unsent Documents
820-131 Resend Unsent Documents from Job Can-
cellation
820-132 Official Stamp Capability (XIPS) Availability 0, 1
823-001 Receive Mode Setting
823-002 DM (Direct Mail) Prevention Function (Only
faxes from a registered in the Speed Dial is
received)
823-006 Receive header (CIL) in G4 Receive
823-007 Send Header at Polling (except forced poll-
ing).
823-011 The maximum user data field length of the
data packet used in the Packet Size (Send)
G4 Communication/Network Layer. For
Ch0
823-012 Enable/Disable Setting of the Symmetry
process to the box that used the service
823-013 Enable/Disable Setting of the Symmetry
process to the box by receive line
823-014 Telephone Number Box Symmetry priority
823-015 Line Monitor Settings. You can monitor the
dial tone and the other party's response
using the speaker from the start of auto
dialing until the other party pick up the call.
823-016 No. of Redials. The No. of Auto-Dials when
there is no response due to line busy etc.
after the first Auto-Dial.
823-017 Redial Interval
823-018 Communication Interval (Time between
Line opening and automated closing)
Reversion 4.0
WorkCentre 7132
Table 11 NVM 825 FAX Service
Setup
Range Initial Value Read/Write
0~65535 1000 Read/Write
0~65535 250 Read/Write
0, 1 0: OFF Read/Write
0, 1 1: Auto delete after Read/Write
24 hours have
passed
0, 1 0: OFF Read/Write
0: OFF Read/Write
0~1 0: Auto Receive Read/Write
0~1 0: Do not prevent Read/Write
0~1 0: No Read/Write
0~1 1: Yes Read/Write
0x07~0x0b 2048bytes Read/Write
0~1 0: Disable Read/Write
0~1 0: Disable Read/Write
0~1 Dial-in no. at highest Read/Write
priority
0~1 1: Line Monitor ON Read/Write
0~9 5: 5 times Read/Write
0~15 1: 1 min Read/Write
3~255 8sec (8) Read/Write
January 2007
6-149
Description
1000~1500
0~500
0: OFF
1: ON
0: Do not auto delete
1: Auto delete after 24 hours have passed
0: OFF
1: ON
0: OFF
1: ON
0: Auto Receive (Auto Answer Incoming), 1: Manual Receive
(No Auto Answer Incoming)
0: Do not prevent, 1: Prevent, 1=Prevent
0: No, 1: Yes
0: No, 1: Yes
Send Packet Size
0x07: 128
0x08: 256
0x09: 512
0x0a: 1024
0x0b: 2048
0: Disable, 1: Enable
0: Disable, 1: Enable
0: Dial-in no. at highest priority, 1: Dial-out tel. No. at highest pri-
ority
0: Line Monitor OFF, 1: Line Monitor ON
0 ~ 9 times (0: No Redial), step: 1 time
0 min (0) ~ 15 min (0x0F), step=1 min
3 second (3) ~ 255 second (0xFF), step=1 second
General procedures information
Controller & Fax NVM List