Xerox WorkCentre 7132 Service Documentation page 1469

Chain-Link NVM Name
800-017 Security Print Output Operation
800-018 Force Extend Print
806-996 Font Mismatch
806-997 ATCX
806-998 PS Color Default
806-999 DMS Settings
Chain 820-xxx Chain 823-xxx Chain 825-xxx FAX Service
Chain-Link NVM Name
820-006 Output Tray of Mail Box Print (Including
printing by instruction)
820-010 Output Tray of Fax Receive Print receive
by line 0 (Extension)
820-011 Output Tray of Fax Receive Print received
by line 1
820-012 Output Tray of Fax Receive Print received
by line 2
820-013 Output Tray of Fax Receive Print received
by line 3
820-014 Output Tray of Fax Receive Print received
by line 4
820-015 Output Tray of Fax Receive Print received
by line 5
820-016 2 Sided print setting (Receive Print/Report
Print/Confirmation Print)
820-019 When printing cannot be performed due o
Forced Polling Selection printer failure, the
acting document of the document received
and other documents will be taken from the
external FAX by Polling. Æ Refer to
Host(FAXCont).
820-024 Broadcast/Multi-Poll Report Instruction Dis-
able
820-025 90 Degree Rotation Storing at FAX Scan
General procedures information
Controller & Fax NVM List
Table 10 Print Service
Setup
Range Initial Value Read/Write
0~1 1: TRUE: Allow Read/Write
Device Print
0~2 1: Do not force Read/Write
extend print
0~1 0: Use a substitute Read/Write
font
0~1 0: ON Read/Write
0~1 1: Color Read/Write
0~1 1: Enable Read/Write
Table 11 NVM 825 FAX Service
Setup
Range Initial Value
0~3 0: Center Tray
0~3 0: Center Tray
0~3 0: Center Tray
0~3 0: Center Tray
0~3 0: Center Tray
0~3 0: Center Tray
0~3 0: Center Tray
0~2 0: 1 Sided
0~1 0: OFF
0~1 0: Permit
0~1 1: 90 Degree Rota-
tion Storing ON
January 2007
Description
1: TRUE: Allow Device Print, 0: FALSE: Forbid Device Print
1: Do not force extend print, 2: Force extend print (For Kutani, installed
from P/L)
0: Use a substitute font, 1: End the job
0: ON, 1: OFF
0: BW, 1: Color
0: Disable, 1: Enable
Read/Write Description
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2,
*Options that are not installed cannot be selected
Read/Write 0: 1 Sided, 1: 2 Sided
Read/Write 0: OFF, 1: Forced Polling
Read/Write 0: Permit, 1: Prohibit
Read/Write 0: 90 Degree Rotation Storing OFF, 1: 90 Degree Rotation Stor-
ing ON
6-146
Reversion 4.0
WorkCentre 7132