Xerox WorkCentre 7132 Service Documentation page 1517

Chain-Link Name
012-027 Rear Tamper Mot Middle FRONT ON/
OFF
012-028 Rear Tamper Mot High FRONT ON/OFF Pulse: ON
012-029 Rear Tamper Mot Low REAR ON/OFF
012-030 Rear Tamper Mot Middle REAR ON/OFF Pulse: ON
012-031 Rear Tamper Mot High REAR ON/OFF
012-046 Staple Motor FORWARD ON/OFF
012-047 Staple Motor REVERSE ON/OFF
012-054 Eject Motor Low FORWARD ON/OFF
012-055 Eject Motor High FORWARD ON/OFF
012-056 Eject Motor Low REVERSE ON/OFF
012-057 Eject Motor High REVERSE ON/OFF
012-060 Stacker Motor UP ON/OFF
012-061 Stacker Motor DOWN ON/OFF
General procedures information
Component Control
Table 6 Output Component Control Codes A-Finisher
Connector Meaning
Pulse: ON Rear Tamper moves to
H: OFF Front at medium speed.
Rear Tamper moves to
H: OFF Front at high speed.
Pulse: ON Rear Tamper moves to
H: OFF Rear at low speed.
Rear Tamper moves to
H: OFF Rear at medium speed.
Pulse: ON Rear Tamper moves to
H: OFF Rear at high speed.
H: ON L: OFF Staple MOT rotates for-
ward.
H: ON L: OFF Staple MOT reverses.
Pulse: ON Eject MOT rotates forward
H: OFF at low speed.
Pulse: ON Eject MOT rotates forward
H: OFF at high speed.
Pulse: ON Eject MOT reverses at low
H: OFF speed.
Pulse: ON Eject MOT reverses at
H: OFF high speed.
H: ON L: OFF Stacker Tray goes up.
H: ON L: OFF Stacker Tray goes down.
January 2007
6-194
Multiple Output
Time Off Prohibited Items
100 pulses 012-026
012-028
012-029
012-030
012-031
100 pulses 012-026
012-027
012-029
012-030
012-031
100 pulses 012-026
012-027
012-028
012-030
012-031
100 pulses 012-026
012-027
012-028
012-029
012-031
100 pulses 012-026
012-027
012-028
012-029
012-030
Staple Home OFF then 012-047
ON makes the motor
stop. (a little longer
when a failure occurs)
180ms 012-046
2000 pulses 012-055
012-056
012-057
2000 pulses 012-054
012-056
012-057
2000 pulses 012-054
012-055
012-057
2000 pulses 012-054
012-055
012-056
80ms 012-061
80ms 012-060
Reversion 4.0
WorkCentre 7132