Xerox WorkCentre 7132 Service Documentation page 1487

Chain-Link NVM Name
830-109 Reply MDN Request
830-116 Ifax Sending Path Specification
830-118 P2P Ifax Retry Attempts
830-119 P2P Ifax Retry Interval (Unit: Minutes)
830-120 Print Mode when Receiving IFAX
Chain 850-xxx EP-SV
Chain-Link NVM Name
850-001 EP-SV, EP Accessory Connection
850-002 Telephone line connection
850-003 EP Data Send Type (This data is the
same as that of EP-DX)
850-004 Enable Display at bundling (This
data is the same as that of EP-DX)
850-007 Types of accessories
850-009 Print Control Function
850-010 Interrupt operation when connected
to subtraction type
850-011 CRU Replacement Notification
Enable/Disable
850-012 CRU Warning Notification Enable/
Disable
850-015 Scan/Fax/I-Fax Control Feature
850-016 Operation for Disable Receive when
connected to subtraction type
850-017 Use Card Number in Print Control
850-018 Paper feeding mode for 2 Sided
Printing when connected to the con-
ventional subtraction type accessory
General procedures information
Controller & Fax NVM List
PSW Display
Reply MDN Mail
IFAX Neto Config Route
IFAX Neto Config Retry Coun
IFAX Neto Config Retry Interval
IFAX Print Mode
Table 13 EP-SV
Setup Range Initial Value Read/Write Description
0~1 0: OFF Read/Write
0~1 0: OFF Read/Write
0~2 0: Send to Read/Write
EP-SV
0~1 0: Prohibit Read/Write
0~12 - Read/Write
0~1 0: Do not Read/Write
control oper-
ation
0~1 1: Interrupt Read/Write
Off
0~1 0: Prohibit Read/Write
0~1 0: Prohibit Read/Write
0~1 0: Do not Read/Write
control oper-
ation
0~1 0: Cancel Read/Write
Job (Cancel)
0~1 1: Use Card Read/Write
No.
0~1 1: One sheet Read/Write
mode
January 2007
Table 12 iFAX Service
Setup Range Initial Value Read/Write
0~1 1 Read/Write
1~2 1 Read/Write
0~5 1 Read/Write
0~60 1 Read/Write
0, 1 0: Auto distrib- Read/Write
ute
0: OFF, 1: ON
0: OFF, 1: ON
0: Send to EP-SV, 1: Send to EP-DX, 2: Send to both
0: Prohibit, 1: Implement
0: Off, 1: CopyLyzer (Addition), 2: CopyLyzer (Subtraction), 3: Dispenser, 4:
Coin Kit5, 5: Combination of CopyLyzer and Copy Dispenser, 6: Combination
of CopyLyzer and Coin Kit 5, 7: Combination of Dispenser and Coin Kit 5, 10:
IC Card Gate
0: Do not control operation, 1: Control operation
0: Interrupt On, 1: Interrupt Off
0: Prohibit, 1: Permit
0: Prohibit, 1: Permit
0: Do not control operation, 1: Control operation
0: Cancel Job (Cancel), 1: Pause Job
0: Do not use Card No., 1: Use Card No.
0: Clear one sheet mode and speed up, 1: One sheet mode
6-164
Description
0: Never reply, 1: Always reply
1: By MTA, 2: By P2P, 3: By user specification (not immediate
0: Do not retry, 1-5: Retry attempts
0: Immediate retry, 1-60: Interval (Minutes)
0: Auto distribute, 1: Print as IFAX data
Reversion 4.0
WorkCentre 7132