Xerox WorkCentre 7132 Service Documentation page 1534
Service manual
Hide thumbs
Also See for WorkCentre 7132:
- User manual (468 pages) ,
- System administration manual (184 pages) ,
- Quick network setup manual (73 pages)
Table of Contents
Advertisement
Determine what Software Options are installed:
1.
Press the <Log In\Out> button on the machine Control Panel.
2.
Enter the correct User ID using the numeric keypad on the Control Panel or the keyboard
screen, then select [Confirm].
NOTE: The default Key Operator ID is (five one's) 11111. If the Auditron feature is
enabled, you may be required to enter the Key Operator ID and the password. The default
password is x-admin (lower case letters).
3.
Select [System Settings] on the [System Administration menu] screen.
4.
Select [System Settings] on the [System Settings] screen.
5.
Select [Common Settings] on the [System Settings] screen.
6.
Select [Screen/Button Settings] on the [Common Settings] screen.
7.
Select [All Services], then select [Change Settings] on the [Screen/Button Settings]
screen.
8.
Select one of the buttons labeled [Not Set] and the list of installed Software Options will
be displayed.
NOTE: It may be necessary to scroll to the next screen by selecting the Down Arrow but-
ton to find a button labeled [Not Set].
NOTE: The default items that will be listed if no Software Options have been installed are:
Copy, Check Mailbox and Stored Programming. The Fax option will also be listed if the
Fax hardware kit is installed.
9.
Select [Cancel], then select [Close] several times and then select [Exit] to exit out of
Tools mode.
NOTE: If xxx is installed, then xxx is also installed, but does not show on the display.
Uninstall Software Options:
NOTE: This procedure will uninstall all Software Options at once; there is no way to select spe-
cific Software Options to uninstall.
NOTE: Be sure that the Software Option booklet(s) are available because if any of the unin-
stalled Software Options need to be reinstalled, the Passwords located in the booklets will be
required.
1.
Press the <Log In\Out> button on the machine Control Panel.
2.
Enter the correct User ID using the numeric keypad on the Control Panel or the keyboard
screen, then select [Confirm].
NOTE: The default Key Operator ID is (five one's) 11111. If the Auditron feature is
enabled, you may be required to enter the Key Operator ID and the password. The default
password is x-admin (lower case letters).
3.
Select [System Settings] on the [System Administration menu] screen.
4.
Select [System Settings] on the [System Settings] screen.
5.
Select [Common Settings] on the [System Settings] screen.
6.
Select [Maintenance] on the [Common Settings] screen.
7.
Select [Software Options] on the [Maintenance] screen.
Reversion 4.0
WorkCentre 7132
8.
Select [Keyboard], then type in ClearAllFlag (all one word and case sensitive) and
select [Save].
9.
Select [Reboot] to reboot the machine.
10. Use the procedure "Determine what Software Options are installed:" to confirm that
the Software Options have been uninstalled.
NOTE: The default items that will be listed when all Software Options have been removed
are: Copy, Check Mailbox and Stored Programming. The option Fax will also be listed if
the Fax hardware is installed.
11. Use the procedure "Uninstall Software Options:" to reinstall the Software Options that
the customer has purchased.
January 2007
6-211
General procedures information
GP 11
Hide quick links:
Advertisement
Chapters
Table of Contents
