Xerox WorkCentre 7132 Service Documentation page 1494

Serial Number/Billing Meter Data
Purpose
Displays the Serial Number, Product Number, and Billing Data.1
Procedure
1. Enter UI Diagnostic Mode.
2. Select Adjustment/Others.
3. Select Machine ID/Billing Data.
NOTE: Serial Numbers, the Product Number, and Billing Data is displayed for IOT, Sys1,
and Sys2.
Failure to perform GP 4 Replacing Billing PWBs, if the MCU PWB, or the MCU PWB EPROM,
or the ESS PWB or the ESS PWB EPROM is replaced could result in NVM corruption and dis-
abling the machine. Refer to REP 9.1.1 MCU PWB or REP 9.1.2 MCU PWB EPROM or REP
9.2.1 ESS PWB or REP 9.2.2 ESS PWB EPROM before installing a new MCU PWB, MCU
PWB EPROM, ESS PWB, or ESS PWB EPROM.
NOTE: GP 4 Replacing Billing PWBs, procedure is used to serialize components and load bill-
ing data on the new MCU PWB, or MCU PWB EPROM, or ESS PWB, or ESS PWB EPROM.
NOTE: Machine Serial Number Plate is located on side frame below rear yellow Fuser mount-
ing screw.
Reversion 4.0
WorkCentre 7132
CAUTION
Printing HFSI
Procedure
1. Enter UI Diagnostic Mode).
2. Select NVM Read/Write.
3. Refer to Table 1 and enter a counter number for any High Frequency Service Item (HFSI)
counters to be checked.
Table 1 High Frequency Service Items
Counter Name
954-800 Tray 1 Feed counter
Reset
only
954-801 Tray 2 Feed counter
954-802 Tray 3 Feed counter
954-803 MSI Feed Roll /
Retard Pad
954-824 IBT Unit
954-825 IBT Cleaner Unit
954-826 BTR2 Unit
954-830 Developer time K
954-831 Developer time Y
954-832 Developer time M
954-833 Developer time C
955-837 Xerographic Module
954-842 Fuser Assembly
January 2007
Serial Number/Billing Meter Data, Printing HFSI
6-171
Threshold Service Action to be performed
300K Replace the Feed Roll, Retard Roll, Nudger
Roll.
300K Replace the Feed Roll, Retard Roll, Nudger
Roll.
300K Replace the Feed Roll, Retard Roll, Nudger
Roll.
50K Replace the Feed Roll, Retard Pad
480K Information not available at this time
100K Information not available at this time
300K Replace the Bias Transfer Roll.
420K Replace K Developer Housing.
420K Replace Y Developer Housing.
420K Replace M Developer Housing.
420K Replace C Developer Housing.
10M Replace the Xero Module
10M Replace the Fuser Assembly
General procedures information