Xerox WorkCentre 7132 Service Documentation page 1485

Chain-Link NVM Name
825-422 Send Mode depending on the availability of
Outside Line Recognition No. (Line 0)
825-423 Send Mode depending on the availability of
Outside Line Recognition No. (Line 1)
825-424 Send Mode depending on the availability of
Outside Line Recognition No. (Line 2)
825-425 Send Mode depending on the availability of
Outside Line Recognition No. (Line 3)
825-426 Send Mode depending on the availability of
Outside Line Recognition No. (Line 4)
825-427 Send Mode depending on the availability of
Outside Line Recognition No. (Line 5)
825-428 Outside Line Recognition No. (Line 0)
825-429 Outside Line Recognition No. (Line 1)
825-430 Outside Line Recognition No. (Line 2)
825-431 Outside Line Recognition No. (Line 3)
825-432 Outside Line Recognition No. (Line 4)
825-433 Outside Line Recognition No. (Line 5)
825-434 Handset Control in Sleep Mode
825-444 Ringer Threshold for CH1
General procedures information
Controller & Fax NVM List
Table 11 NVM 825 FAX Service
Setup
Range Initial Value Read/Write
0~2 0: Do not set (Follow Read/Write
machine settings)
0~2 0: Do not set (Follow Read/Write
machine settings)
0~2 0: Do not set (Follow Read/Write
machine settings)
0~2 0: Do not set (Follow Read/Write
machine settings)
0~2 0: Do not set (Follow Read/Write
machine settings)
0~2 0: Do not set (Follow Read/Write
machine settings)
0~11 0 Read/Write
0~11 0 Read/Write
0~11 0 Read/Write
0~11 0 Read/Write
0~11 0 Read/Write
0~11 0 Read/Write
0~1 1 Read/Write
0~1 0 Read/Write
January 2007
6-162
Description
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: Do not set (Follow machine settings), 1: V.34 communication
if the first digit at the beginning of the outgoing dial data is the
same as external identification number; Non-V.34 communica-
tion if it is different. 2: Non-V.34 communication if the first digit at
the beginning of the outgoing dial data is the same as external
identification number; V.34 communication if it is different.
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: "0" ~ 9: "9" 10: "#" 11: "*"
0: Not connected (no tone), 1: Connected (tone)
0: 11~22Vms, 1: 17~33Vms. This is usually adjusted in the hard-
ware to "11~22Vms"
Reversion 4.0
WorkCentre 7132