Clutch Cover; Generator Cover - Suzuki DR-Z70 Service Manual

CLUTCH COVER

• Install the dowel pins 1 and gasket 2 .
The removed gasket must be replaced with a new one
to prevent oil leakage.
• Install the clutch cover 3 and tighten its bolts to the specified
torque.
Clutch cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
CLUTCH ADJUSTMENT
• Loosen the lock-nut 1 .
• First, turn the release screw 2 clockwise by one turn and turn
it counterclockwise until resistance is felt, then turn it clock-
wise by 1/8 turn.
• Tighten the lock-nut 1 while holding the release screw 2 .

GENERATOR COVER

• Install the dowel pins 1 and gasket 2 .
The removed gasket must be replaced with a new one
to prevent oil leakage.
• Install the generator cover 3 .
• Tighten the generator cover bolts to the specified torque.
Generator cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Install the lead wire clamp with the bolt A.
ENGINE 3-64