Suzuki DR-Z70 Service Manual page 83

3-51 ENGINE
LEFT CRANKCASE BEARING INSTALLATION
• Install the bearings with the special tool.
Bearing 1 : 62 Attachment
Bearing 2 : 17 Attachment
Bearing 3 : 40 Attachment
NOTE:
When installing the bearing, stamped mark on bearing must face
outside.
The removed bearings must be replaced with new
ones.
09913-70210: Bearing installer set
LEFT CRANKCASE OIL SEAL INSTALLATION
• Install the oil seals 1 to the left crankcase with the special
tool.
• Apply SUZUKI SUPER GREASE "A" to the oil seal lip.
99000-25010: SUZUKI SUPER GREASE "A"
09913-70210: Bearing installer set
The removed oil seals must be replaced with new
ones.
or equivalent