OIL PUMP
DISASSEMBLY
• Remove the O-rings 1 .
• Remove the circlip 2 , washer 3 , oil pump driven gear 4 and
pin 5 .
INSPECTION
Rotate the oil pump shaft by finger and check for abnormal play,
noise and smooth rotation.
If there is anything unusual, replace the oil pump.
Do not attempt to disassemble the oil pump assembly.
It is available only as an assembly.
REASSEMBLY
• Reassemble the oil pump in the reverse order of disassembly.
Apply SUZUKI SUPER GREASE "A" to the O-rings 1 .
99000-25010: SUZUKI SUOER GREASE "A"
• Install the O-rings 1 .
The removed O-rings must be replaced with new ones.
OIL SUMP FILTER
• Clean the oil sump filter with compressed air.
or equivalent
ENGINE
3-38