Suzuki DR-Z70 Service Manual page 82

LEFT CRANKCASE OIL SEAL REMOVAL
• Remove the oil seals 1 with the special tool.
09913-50121: Oil seal remover
RIGHT CRANKCASE BEARING INSTALLATION
• Install the bearings with the special tool.
09913-70210: Bearing installer set
Bearing 1 : 52 Attachment
Bearing 2 : 40 Attachment
Bearing 3 : 35 Attachment
NOTE:
When installing the bearing, stamped mark on bearing must face
outside.
The removed bearings must be replaced with new
ones.
• Apply a small quantity of THREAD LOCK SUPER "1322" to
the bearing retainer screws.
99000-32050: THREAD LOCK SUPER "1322"
• Tighten the screws 4 securely.
ENGINE 3-50