Suzuki DR-Z70 Service Manual page 63

3-31 ENGINE
• Apply engine oil to the rocker arm shafts and rocker arms.
Install the intake rocker arm shaft 6 and exhaust rocker arm
shaft 7 .
NOTE:
* Face the thread part of the rocker arm shafts to the outside.
• Install the gasket 2 and cylinder head right cover 3 to the
cylinder head.
The removed gasket must be replaced with a new one.
• Tighten the cylinder head right cover bolts 4 securely.
INTAKE PIPE
• Install the intake pipe O-ring 1 .
• Apply SUZUKI SUPER GREASE "A" to the intake pipe O-ring
1 .
The removed O-ring must be replaced with a new one.
99000-25010: SUZUKI SUPER GREASE "A"
• Tighten the intake pipe nuts 2 to the specified torque.
Intake pipe nut: 5.5 N·m (0.55 kgf-m, 4.0 lb-ft)
or equivalent