Suzuki DR-Z70 Service Manual page 44

CYLINDER
• Remove the dowel pins 1 , cylinder head gasket 2 , O-ring 3
and cam chain guide 4 .
• Remove the cylinder base nut 5 .
• Remove the cylinder 6 .
NOTE:
If the cylinder does not come off easily, lightly tap it with a plastic
mallet.
• Remove the dowel pins 7 and cylinder gasket 8 .
PISTON
• Place a clean rag over the cylinder base to prevent the piston
pin circlip from dropping into the crankcase.
• Remove the piston pin circlip 1 .
• Remove the piston pin 2 and piston 3 .
NEUTRAL SWITCH
• Remove the neutral switch 1 .
• Remove the neutral switch contact 2 and spring 3 .
ENGINE 3-12