Clutch Cover; Oil Filter - Suzuki GZ250 Service Manual

CLUTCH COVER

• Remove the oil seal retainer
• Remove the oil seal
09913-50121: Oil seal remover
• Install the new oil seal using a suitable socket
• Install the oil seal retainer.
NOTE:
Apply a small quantity of THREAD LOCK "1342" to the oil
seal retainer screws.
99000-32050: THREAD LOCK "1342"

OIL FILTER

• Remove the oil filter cap
• Remove the oil filter
NOTE:
Before installing the new oil filter and oil filter cap, make
sure that the spring
installed correctly.
• Install the oil filter cap.
using the special tool.
and install a new one.
and new O-rings are
ENGINE 3-46