Specifications; I.d. No. Location; Removal - Suzuki DR-Z70 Service Manual

SPECIFICATIONS

ITEM
Carburetor type
Bore size
I.D. No.
Idle r/min
Float height
Main jet (M.J)
Jet needle (J.N)
Needle jet (N.J)
Pilot jet (P.J)
Air screw (A.S)
Throttle cable play

I.D. NO. LOCATION

• The carburetor has I.D. Number A stamped on the carburetor
body.

REMOVAL

• Remove the seat. (
• Turn the fuel valve to the "OFF" position.
• Remove the exhaust pipe cover. (
• Loosen the drain plug 1 and drain the fuel from the carbure-
tor.
Gasoline is highly flammable and explosive.
Keep heat, spark and flame away.
• Disconnect the carburetor top cap 2 .
• Disconnect the starter cable 3 .
• Loosen the intake pipe clamp screw 4 .
• Remove the carburetor mounting bolts/nuts 5 .
• Remove the carburetor assembly 6 .
5-2)
2-19)
SPECIFICATION
MIKUNI VM13SH
13 mm (0.5 in)
14H0
1 600 ± 100 r/min
23.4 ± 1.0 mm (0.92 ± 0.04 in)
#55
3L43
E-5M
#17.5
PRE-SET (2 turns back)
2.0 – 4.0 mm (0.08 – 0.16 in)
FUEL SYSTEM 4-6