RIGHT CRANKCASE COVER
Install the dowel pins 1 and new gasket 2.
Use a new gasket to prevent oil leakage.
Tighten the right crankcase cover bolts securely.
NOTE:
Install the new gasket onto the right crankcase cover bolt A as
shown.
CLUTCH COVER
Tighten the clutch cover bolts securely.
NOTE:
Install the new gasket onto the clutch cover bolt A as shown.
GENERATOR ROTOR COVER
Install the starter driven gear 1 (DR-Z400E), dowel pins 2,
and new gasket 3.
Use a new gasket to prevent oil leakage.
Tighten the generator rotor cover bolts securely. (DR-Z400)
ENGINE
2
1
1
3
2
3-57
1
A
A
2