Suzuki DR-Z70 Service Manual page 80

• Remove the oil seal 5 .
• Remove the oil seal 6 with the special tool.
09913-50121: Oil seal remover
REASSEMBLY
Reassemble the clutch cover in the reverse order of disassem-
bly. Pay attention to the following points:
• Install the oil seal 1 and 2 with the special tool.
09913-70210: Bearing installer set
The removed oil seals must be replaced with new
ones.
• Apply SUZUKI SUPER GREASE "A" to the lip of the oil seal.
99000-25010: SUZUKI SUPER GREASE "A"
• Install the O-ring 3 .
The removed O-ring must be replaced with a new one.
or equivalent
ENGINE 3-48