Suzuki DR-Z70 Service Manual page 134

• Tighten the handlebars set bolts to the specified torque.
Handlebars set bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
HANDLEBAR RIGHT SIDE PARTS
• Install the throttle cable.
• Apply SUZUKI SUPER GREASE "A" to the throttle cable end.
99000-25010: SUZUKI SUPER GREASE "A"
• When installing the throttle case, align the throttle cable
holder edge B with the throttle case C .
• Align the projection D of the throttle case with the hole E on
the handlebars.
NOTE:
Tighten the upper screw first and then lower screw to screw the
throttle case.
or equivalent
CHASSIS 5-19