Neutral Switch; Piston Ring - Suzuki DR-Z70 Service Manual

3-65 ENGINE

NEUTRAL SWITCH

• Install the spring 1 and neutral switch contact 2 .
• Apply SUZUKI SUPER GREASE "A" to the O-ring 3 .
99000-25010: SUZUKI SUPER GREASE "A"
• Install the neutral switch 4 .
The removed O-ring must be replaced with a new one.

PISTON RING

• Install the piston rings in the order of oil ring, 2nd ring and 1st
ring.
• To install the oil ring, fit the spacer 1 first and then the side
rails 2 .
* When installing the spacer, be careful so that the
both edges are not overlapped.
* When installing the piston rings, be careful not to
damage the piston.
* Do not expand the piston ring excessively since it is
apt to be broken down.
• Install the 2nd ring and 1st ring.
NOTE:
2nd ring and 1st ring differ in shape.
or equivalent
INCORRECT
CORRECT
1st
2nd