Suzuki DR-Z70 Service Manual page 129

5-14 CHASSIS
• Align the projection A on the spring joint with the slot B on
the outer tube.
• Install the snap ring as shown in the illustration.
After installing the snap ring, always insure that it is
completely seated in its groove and securely fitted.
• Tighten the front fork upper bracket bolts 6 to the specified
torque.
Front fork upper bracket bolt:
• Install the front wheel and brake. (
• Install the front number plate. (
45 N·m (4.5 kgf-m, 32.5 lb-ft)
5-9)
5-3)
Inner tube
Snap ring
Outer tube
Rounded
part