Suzuki DR-Z70 Service Manual page 75

3-43 ENGINE
Clutch drive and driven plate claw width
Service Limit (drive): 15.15 mm (0.596 in)
(driven): 11.3 mm (0.44 in)
09900-20101: Vernier calipers
REASSEMBLY
Reassemble the gearshifting clutch in the reverse order of disas-
sembly. Pay attention to the following points:
• Align the claw 1 of clutch driven plate No.1 2 with the boss
3 of clutch sleeve hub.
• Align the claw 5 of clutch driven plate No.2 4 with the
groove 6 of clutch sleeve hub.
• Face the boss of primary driven gear 7 to upper when install-
ing it.
• Align the claw 8 of clutch driven plate No.1 with the hole 9 of
primary driven gear.