Ricoh FT8680 Service Manual page 356

31 July 1995
[d]
[D]
[f]
4. Remove the upper cover the transport unit and adjust the tension of the
belts [D] with the motor position brackets [d] (3 screws).
Standard: 3 mm deflection at 450 ± 300 g pressure.
5. Remove the upper cover of the transport unit and adjust the belt [E]
tension with the tightener [e].
Standard: 2 mm deflection at 300 ± 120 g pressure.
6. Remove the upper cover of the transport unit and adjust the belt [F]
tension with the tightener [f].
Standard: 3 mm deflection at 340 ± 120 g pressure.
[D]
A171R657.img
[F]
A171R656.img
5-127
[e] [E]
ARDF
A171R658.img