Ricoh FT8680 Service Manual page 273

CLEANING
[D]
[C]
[B]
[A]
9. Take out the bushing [A], the ground terminal [B], and the flick roller
holder [C].
10. Slide the flick roller [D] out of the rear of the cleaning unit.
NOTE: When reassembling the cleaning unit after maintenance, fix the
bushing bracket so that the mounting screw is located in the
middle of the long screw hole [E].
A171R601.img
5-44
31 July 1995
[E]
A171R680.img