Ricoh FT8680 Service Manual page 319

INVERTER & PAPER EXIT
10. INVERTER & PAPER EXIT
10.1 INVERTER UNIT REMOVAL
[C]
N
CAUTION:
While doing the following step, take care not to drop the inverter unit.
1. Remove the fusing unit.
2. Open the inverter unit [A] and disconnect the connectors [B] as shown:
3. Remove 4 screws [C] of the inverter unit.
NOTE: Do not remove the shoulder screw [D] which supports and
positions the inverter unit. Otherwise, the inverter unit will fall.
4. Close the inverter unit.
5. Remove the inverter unit from the large cutout of the bracket in which the
shoulder screw is fixed.
[D]
5-90
[C]
[A]
A171R631.img
31 July 1995
[B]