Ricoh FT8680 Service Manual page 194

31 July 1995
8
SP Test Mode – 4 (PAGE 2)
Test Procedure
Touch on the display and press the "START" key top to start.
SET
Touch or press the "CLEAR/STOP" key top to stop.
RESET
Item
Drum Conditioning
Mode
Free Run Mode
(Lamp ON)
Free Run Mode
(Lamp OFF)
Scanner Free Run
Mode
ADF Free Run
Mode
CFF Free Run
Mode
Fusing Pressure
Check Mode
A171M522.img
Function
Turns on the main motor, the
development drive motor, corona
power packs, and the erase lamp.
Operates the copier without
feeding paper.
Operates the copier without
feeding paper or turning on the
exposure lamp.
Runs the scanner unit.
Feeds originals automatically
without main copier operation.
Feeds CFFs (computers forms)
automatically without main copier
operation.
During the copy cycle, the
machine stops a copy stops in the
fusing unit for 15 seconds.
SERVICE PROGRAM MODE
Place sheets of white paper (A3 or
11" x 17") on the exposure glass.
Do not operate the machine in this
mode for a long time.
Before testing, place originals in
the original table. The test is
finishes when all originals are fed
out.
Before testing, place CFFs in the
original table. The test is finished
when all CFFs are fed out.
Select a paper tray before
accessing the SP mode and open
document feeder to makes a sky
shot.
4-17
Remarks