Ricoh FT8680 Service Manual page 303

REGISTRATION AND TRANSPORT
8.3 RELAY TRANSPORT UNIT REMOVAL (BY-PASS FEED
TABLE VERSION)
[B]
[A]
1. Remove the LCT if it is installed.
2. Remove the by-pass feed table (follow the steps from 1 to 6 of the paper
feed roller, separation roller, and pick-up roller replacement of the
by-pass feed tray).
3. Remove the by-pass rear lower and upper covers [A, B] (1 screw each).
4. Remove the transport inner cover [C] (5 screws and 1 knob).
5. Remove the relay transport unit [D] (4 screws and 1 connector [E]) as
shown.
A171R542.wmf
[E]
5-74
31 July 1995
[C]
[D]
A171R537.img