Ricoh FT8680 Service Manual page 243

OPTICS
[E]
[C]
– Blue Wire –
14. Set the bead of the blue wire [A] into the slot of the scanner drive pulley
as shown and wrap the wire three and a half times on the pulley from
bottom to top, counterclockwise.
15. Run the blue wire through the pulleys as shown.
Use the following tracks of the pulley:
[B]: Lower
[C]: Lower
[D]: Upper
16. Hook the wire end to the tension spring [E].
[D]
[B]
[A]
5-14
31 July 1995
A171R556.img