Ricoh FT8680 Service Manual page 254

31 July 1995
2.8 MIRROR UNIT DRIVE MOTOR REMOVAL
[A]
1. Remove the left rear cover and left top cover.
2. Remove the optics shielding cover [A] (4 screws).
3. Remove the tension spring [B] and loosen the mounting screws of the belt
tightener bracket [C] (2 screws).
4. Remove the encoder sensor [D] (1 screw) and the encoder disc [E] (1
screw), then remove the timing belt [F].
5. Remove the motor bracket [G] (2 screws).
6. Remove the idle gear [H] (1 E-ring) and the drive motor [I] (2 screws).
A171R582.img
[D]
[I]
5-25
[E]
[H]
[F]
OPTICS
[G]
[B]
[C]
A171R561.img