Ricoh FT8680 Service Manual page 292

31 July 1995
7.2 PAPER FEED ROLLER, SEPARATION ROLLER, AND
PICK-UP ROLLER REPLACEMENT
[C]
1. Remove the tray. (In case of the 2nd feed station, remove the both 1st
and 2nd trays.)
2. Pull out the vertical transport unit.
3. Slide off the pick-up, feed, and separation rollers [A, B, and C] (1 snap
ring each).
NOTE: Do not touch the surface of the rollers with oily hands. The paper
feed rollers used in the 1st ~ 3rd feed stations are different from
the feed rollers in the LCT and the by-pass feed table.
Distinguish them by the color of the side plate ("hub") of rollers.
White one
Black one
1st ~ 3rd feed
LCT and by-pass feed
5-63
1ST, 2ND, AND 3RD TRAYS
[B]
[A]
A171R541.wmf