Ricoh FT8680 Service Manual page 253

OPTICS
– Lens Horizontal Drive Wire Installation –
9. Reassemble the drive motor unit.
10. Set the bead of the drive wire to the hook [A] on the lens base and wrap
the wire on the drive pulley [B] two and a half times from bottom to top
clockwise. Fix the spring to the lens base as shown.
NOTE: Confirm that no wire is overlapping on the drive pulley.
11. Reassemble the machine.
NOTE: Fix the shading plate [C] at the nearest position to the lens.
[A]
[B]
A171R580.img
5-24
31 July 1995
[C]
A171R579.img