Ricoh FT8680 Service Manual page 241

OPTICS
[A]
[B]
6. Remove the upper optics housing [A] (4 screws at front, 4 screws on top,
and 1 connector [B]).
7. Loosen the front and rear wire clamps [C] of the first scanner (2 screws
each).
NOTE: Do not loosen any screws which are marked with white paint.
8. Remove the flat cable holder bracket fixed on the main frame [D]
(1 screw).
9. Remove front scanner guides [E] (1 screw each).
10. Remove the first scanner unit [F].
11. Remove the scanner wires.
[C]
[E]
5-12
31 July 1995
[C]
[D]
[F]
A171R530.img