Ricoh FT8680 Service Manual page 239

OPTICS
[E]
7. Remove the flat cable holder fixed on the first scanner [A] (2 screws).
8. Slide out the flat cable holder bracket [B] (1 screw) and remove the holder
[C] (2 screws).
9. Remove the flat cable [D] (3 connectors).
10. Remove the fiber optics cable running through the harness clamps.
NOTE: 1. The fiber optics cable with the white mark on the end is for the
light intensity sensor (CN115 on the main PCB).
2. The fiber optics cable has to be reinstalled with the white mark
side [E] facing the flat cable (see figure).
[A]
[C]
[D]
[B]
A171R581.img
5-10
31 July 1995
A171R553.img
A171R.584.img