Ricoh FT8680 Service Manual page 250

31 July 1995
2.6 LENS VERTICAL DRIVE MOTOR REMOVAL
[A]
[C]
[B]
1. Unplug the machine.
2. Remove the rear right cover, the left upper cover, and the exposure glass.
3. Remove the FL stabilizer board [A] (4 studs).
4. Unhook the tension spring [B] and loosen two screws [C] fixing the belt
pulley bracket.
5. Remove the encoder sensor [D] (1 screw and 1 connector).
6. Remove the encoder disc [E] (1 screw) and remove the timing belt.
7. Remove the motor bracket [F] (1 screw and 1 connector).
8. Remove the lens vertical drive motor [G].
[D]
5-21
OPTICS
[E]
[F]
[G]
A171R562.img